Power Tools & Accessories Shop by Sale Group:



Power Tools & Accessories for Sale:


 M.A. Ford Solid Carbide Burrs

M.A. FORD SOLID CARBIDE BURRS Mfg: Brownells SPECS: 25 flutes; right hand spiral and rotation; No. 3 cut; 1/8' (3.2mm) shank; All cutting surfaces are 1/4'''' ...

See Prices
 Solid Carbide Drill

Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a cl...

See Prices
 3-Flute Carbide Drill

Three-flute design spreads cutting loads over a larger area so holes are cleaner and rounder. The bit itself will last longer too. Designed for cutting hard m...

See Prices
 Carbide Center Drill

If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and ''''start''...

See Prices
 Barrel Liner Drills

For the gunsmith who does not want to make his own drill extension, our Hi-Speed steel drills are designed especially for deep hole drilling for Brownell Barrel...

See Prices
 Short, Piloted Barrel Liner Drill

If you can silver solder or braze your own extension onto a Liner Drill, these standard length, deep hole drills can save you money. Piloted to follow the origi...

See Prices
 Tin Coated Drill

TiN COATED DRILL Mfg: Brownells SPECS: Jobber length....

See Prices
 Premium Grinding Point Kit

Brownells "Premium Plus" stones are the very finest we can offer. Industrial grade cobalt is added to uniformly sized aluminum oxide crystals and bonded with sp...

See Prices
 Mx Polishing Wheels

Non-woven, cotton fiber, bonded with aluminum oxide abrasive retains its shape well and is ideal for finishing, polishing, final shaping, and removing scratch m...

See Prices
 Barrel Crowning Lathe Bit

A difficult tool to grind correctly. These are expertly done to give maximum cutter strength and proper clearance as cutter tip enters bore and shank approaches...

See Prices
 Threading Bits For Lever Actions

Correctly ground threading bits cut true, 12 tpi, square threads for Marlin lever action and Remington Rolling Block rifles. Mfg: Brownells SPECS: 1/4" (6.3mm)...

See Prices
 Bolt Facing Lathe Bit

Cobalt alloy bit provides maximum cutting force to open bolt faces to magnum dimensions. Back rake, front and side clearance, lip angle, cutting angle and chip ...

See Prices
 Carbide Standard Sight Base Cutter

Universal Sight Base Cutter made for sights with 60deg shoulder and a 3/8'''' base. Cuts most standard front and rear rifle sights as well as 1911 Auto low-moun...

See Prices
 Carbide Semi-Auto Pistol Sight Base Cutter

Our special 65deg shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like W...

See Prices
 Front Sight Insert Cutter

We've had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when installing colored inserts. The one ...

See Prices
 Carbide Sight Insert Cutter

Weve had many requests for a small dovetail cutter that would speed up the cutting of dovetails in front sight blades when installing colored inserts. The one w...

See Prices
 Meprolight~ Dovetail Cutter

Cuts the .250'''' x 74deg dovetail required when altering ramp-style front sights to accept Meprolight's Universal front sight inserts. Cutter can be used to op...

See Prices
 High Speed Steel Wilson Dovetail Cutter

2" (5cm) long. .375" (9.5mm) diameter shaft. 60deg shoulder. DO NOT EXCEED 700 rpm, HIGHER SPEED WILL BREAK TEETH. Sight is a .300" x 60 degree dovetail that ma...

See Prices
 Carbide Wilson Dovetail Cutter

Solid carbide 2'''' (5cm) long. .375'''' (9.5mm) diameter shaft. 60deg shoulder. Mfg: Brownells...

See Prices
 Hss Front Sight Dovetail Cutter

Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark, Ed Brown, Bob Marvel and others. Slightly undersized to allow for prec...

See Prices
 Hss Semi-Auto Pistol Sight Base Cutter

Our special 65deg shoulder Sight Base Cutter designed to cut dovetails for both standard Colt factory and mil-spec 1911 Autos, and for replacement sights like W...

See Prices
 High Speed Steel Standard Sight Base Cutter

Universal Sight Base Cutter made for sights with 60deg shoulder and a 3/8'''' base. Cuts most standard front and rear rifle sights as well as 1911 Auto low-moun...

See Prices
 Heinie Rear Sight Cutter

Cuts the .370 x 65deg dovetail required when fitting Heinie rear sights. Solid carbide cuts the hardest slides with minimal wear. Mfg: Brownells...

See Prices
 1911 Auto Hss Lo-Mount Sight Base Cutter

These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the Wichita and Novak Lo-Mount 1911 ...

See Prices
 Carbide Front Sight Dovetail Cutter

Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark, Ed Brown, Bob Marvel and others. Slightly undersized to allow for prec...

See Prices
 1911 Auto Carbide Dovetail Sight Base Cutter

These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the Wichita and Novak Lo-Mount 1911...

See Prices
 High Speed Steel End Mill Cutter

Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand heli...

See Prices
 Extractor Milling Cutters

Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extractio...

See Prices
 Solid Carbide Center-Cut End Mill Cutters

Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand heli...

See Prices
 Solid Carbide Ball End Mills

Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turn...

See Prices
 Solid Carbide End Mills

The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with...

See Prices
 Mx Finishing Wheels

Non-woven, cotton fiber, bonded with aluminum oxide abrasive retains its shape well and is ideal for finishing, polishing, final shaping, and removing scratch m...

See Prices
 Cryo-Treated Dovetail Cutter

We've taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer, saving down...

See Prices
 Barrel Threading Lathe Bits

Square Thread Bits cut true 10 tpi, square, barrel threads for '03 Springfields and Enfields. 55deg Threading Bits have offset cutter and are the correct bit wh...

See Prices
 High-Speed Steel Cutting Kits For Lathes - 1/2

Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed St...

See Prices
 High-Speed Steel Cutting Kits For Lathes - 1/2

Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed St...

See Prices
 High-Speed Steel Cutting Kits For Lathes - 3/8

Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed St...

See Prices
 High-Speed Steel Cutting Kits For Lathes - 5/16

Tooling kits include hardened steel toolholders and high speed steel inserts for turning, threading, profiling, and cut-off work. Inserts are T-15 High Speed St...

See Prices
 High-Speed Steel Insert

High Speed Steel inserts may be the answer to many machining problems where other materials fail by chipping or breakage. High Speed Steel performs at slow surf...

See Prices
  Mandrels

#4 Point Mandrel, 1/8" shank diameter, fits 1/16" (1.59mm) arbor hole. #6 Point Mandrel, 1/8" shank diameter fits 1/8" arbor hole. 25,000 rpm max. Mandrels sold...

See Prices
  Replacement Cylinder Points

Bulk replacements sold 25 each per pkg. #6 Cylinder Point, 1/4" (6.3mm) diameter, 7/8" (22.2mm) long. Mfg: Cratex...

See Prices
  Replacement Bullet Points

Bulk replacements sold 25 each per pkg. #8 Bullet Point, 9/32" (7.1mm) diameter, 1" (2.5cm) long. #11 Bullet Point, 3/8" (9.5mm) diameter, 1" long. #15 Bullet P...

See Prices
  Wheels

#74 Straight Edge Wheel, 7/8" (22.2mm) diameter, 1/8" thick. #86 Straight Edge Wheel, 1" diameter, 3/16" (4.76mm) thick. Mfg: Cratex...

See Prices
  Abrasive Kit

A mighty handy kit of small, flexible abrasive wheels and points - fully shaped, and ready to use. Polish, smooth, deburr...many, many uses in the gun and machi...

See Prices
 Heavy-Duty Emery Cut-Off Wheel

.040'''' (1mm) thick for wider slotting, less breakage, longer service life. 15/16'''' (24mm) diameter. Sold in pak of 20. Mfg: Dremel...

See Prices
 Fiberglass Reinforced Cut-Off Wheel

1 1/4'''' (3.2cm) dia. Larger diameter makes it possible to cut thickermaterial. Long lasting. Sold in pak of 5. Mfg: Dremel...

See Prices
 Drum Sander Mandrel

1/2'''' dia. For use with #408, #432 and other 1/2'''' sander bands. Mfg: Dremel...

See Prices
 Flap Wheel Sander

1-1/8'''' (2.8cm) dia. wheels. 502, 3/8'''' (9.5mm) wide, 80 grit; 504, 3/16'''' (4.8mm) wide, 80 grit. 503, 3/8'''' (9.5mm) wide, 120 grit; 505, 3/16'''' (4.8m...

See Prices
 Perma Grit Carbide Wheel #543

Cool running carbide wheel for slicing, cutting-off and shaping wood. 1 1/4" (3.2cm) dia. 1/8" (3.2mm) shank. Mfg: Dremel...

See Prices
  High Speed Steel Cutters

Made of finest high speed steel. Can be used for cutting, shaping most metals, plastics and woods. 1/8'''' shanks. Mfg: Dremel...

See Prices
  Carbide Cutters

DREMEL CARBIDE CUTTERS Mfg: Dremel...

See Prices
 Drum Sander Bands #408, 432

1/2'''' (12.7mm) dia. coarse grit; No. 432, 1/2'''' dia. fine grit. Pak of 6. Mfg: Dremel...

See Prices
 Motor Brushes

No. 990828 for 232/332 Moto-Flex Tool. Mfg: Dremel...

See Prices
 Wire Brushes

Small, versatile, steel brushes for efficiently removing rust, corrosion and polishing metal surfaces. 1/8'''' (3.2m) shanks. Mfg: Dremel...

See Prices
 Carbide Slitting Saw

High-quality, solid-carbide slitting saw cuts accurate, great-looking, cocking serrations on hardened 1911 Auto slides without dulling. Square saw matches cocki...

See Prices
 Hand Tool Accessories

Popular accessory kits contain everything needed to shape, cut, polish and finish most materials including wood, metal, plastic and fiberglass. Designed to comp...

See Prices
 Fct-1 Foot-Operated Speed Control

Comfortable, easy-to-operate foot pedal lets you maintain smooth, precise speed control of your Foredom SR Power Tool, so both hands are free to work on your pr...

See Prices
 30 Handpiece

Key-type chuck for shank sizes up to 5/32''''. Grease-sealed ball bearings; complete with key. Mfg: Foredom SPECS: 5'''' (12.7cm) long, 1'''' (2.5cm) diameter 6...

See Prices
 Collet Sets

COLLET SETS Mfg: Foredom...

See Prices
  S-1 Sphere Head Carbide Cutters

Kutzall original coated burrs cuts with randomly-positioned teeth working simultaneously to help remove material rapidly. These tools create a smooth cutting a...

See Prices
 Letter Drills - Jobber Length

A heavy-duty drill can make all the difference in the world in your work. The extra engineering and care in manufacture will help you to drill cleaner, more acc...

See Prices
 Jobber Length Maxi Set

JOBBER LENGTH MAXI SET Mfg: Triumph Twist Drill Co. SPECS: 115 pieces in 14 1/2'''' x 4 3/4'''' x 2 1/2'''', 5 tray box. U.S. made....

See Prices
 Fractional Drills - Jobber Length

A heavy-duty drill can make all the difference in the world in your work. The extra engineering and care in manufacture will help you to drill cleaner, more acc...

See Prices
 Wire Gauge Drills - Short Length

A heavy-duty drill can make all the difference in the world in your work. The extra engineering and care in manufacture will help you to drill cleaner, more acc...

See Prices
 Wire Gauge Drills - Jobber Length

A heavy-duty drill can make all the difference in the world in your work. The extra engineering and care in manufacture will help you to drill cleaner, more acc...

See Prices

Like Us on FaceBook: