Reloading Dies Shop by Sale Group:



Reloading Dies for Sale:


  76 Style Titanium Nitride Bushings - .253 To .305

Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing f...

See Prices
  76 Style Titanium Nitride Bushings - .306 To .368

Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing f...

See Prices
 Neck Sizing Dies

The Redding Neck Sizing Dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should ne...

See Prices
 Full Length Die Sets

The Redding FL Die Sets include the full length (FL) sizing die and the standard seating die. When ordering please give us the Full Length Die Set number. Mfg: ...

See Prices
  Standard Bullet Seating Micrometers

Redding Competition Seating Dies deliver the precision and accuracy preferred by the most discriminating handloaders. Now you can easily covert your conventiona...

See Prices
  Competition Bushing Neck Die, Category I Cartridges

This neck sizing die with interchangeable bushings is similiar in concepts to the Redding Competition Seating die. The cartridge case is completely supported an...

See Prices
 Taper Crimp Dies

Originally designed for handgun cartridges which headspace on the case mouth where conventional roll crimping is undersirable. Taper crimps offer a uniform crim...

See Prices
  Competition Standard Length Vld Seater Stems

Redding Competition Standard Length VLD Seater Stems. Stems are 1" long. Mfg: Redding...

See Prices
  73 Style Steel Bushing - .251 To .305

Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available througho...

See Prices
  Type S-Neck Bushing Dies, Category I Cartridges

Bushing Neck Sizing Die utilizes interchangeable bushings for precise case neck resizing, allowing the reloader to control the amount of neck sizing on his case...

See Prices
 Competition Handgun Seater Dies

These seaters have a precision fitting bullet seating stem which is spring loaded. As the bullet and case move up into the seater positive alignment is insured....

See Prices
  73 Style Steel Bushing - .185 To .250

Heat treated steel bushings. The sizing diameters are hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Bushings are available througho...

See Prices
 Tapered Sizing Buttons

These long tapered expanders (sizing buttons) are made for expanding the necks of bottleneck cartridges up to the desired size. Can be used only in the Standard...

See Prices
  Ftx Profile Crimp Die

A special Profile Crimp Die designed for the 45-70 FTX due to its shorter case length. Mfg: Redding...

See Prices
 Master Hunter Die Sets

The Master Hunter series combines Redding's proven Competition Seating Die with a full-length sizing die that lets the hunter load exceptionally consistent ammo...

See Prices
  Sizing Button - Std/Type S

Redding Sizing button - Std/Type S Mfg: Redding...

See Prices
  Type-S Neck Bushing Die Set - 264 Win Mag

Redding Type-S Neck Bushing Die Set - 264 Win Mag Mfg: Redding...

See Prices
  Type-S Neck Bushing Die Set, 7mm Wsm

Redding Type-S Neck Bushing Die Set, 7mm WSM Mfg: Redding...

See Prices
 Dual Ring Carbide Sizing Dies

These tool steel sizing dies incorporate two separate Titanium carbide rings to properly resize straight-wall pistol cases. With a single stroke of the press, t...

See Prices
 Decapping Pins

Decapping Pins for use in Redding Reloading Dies. Mfg: Redding...

See Prices
 Micro-Adjustable Taper Crimp Dies

Top-adjusting dies save time and aggravation by eliminating the need to remove the die from the press in order to adjust the bullet crimp - perfect for high-vol...

See Prices
 Micro-Adjustable Taper Crimp Dies

Redding's new Micro-Adjustable Taper Crimp Dies are Top Adjusting to simplify making precise adjustments. Variations in case length and wall thickness both adv...

See Prices
  Neck Die, 224 Wthby Mag

These dies size only the necks of your bottleneck cases to prolong brass like and improve accuracy. It is important that fired cases should never be interchang...

See Prices
  Neck Die Set, 340 Wthby Mag

The Redding Neck Die Sets include the neck sizing die and the standard seating die. When ordering please give us the Neck Die Set number. Mfg: Redding...

See Prices
 3-Die Handgun Sets

Redding Die Sets for Handgun cases contain three dies. This is necessary because it is not possible to full length resize straight wall cases and expand the nec...

See Prices
  Small Base Body Die, 30-06 Sprgfld

Redding Small Base Body Die, 30-06 Sprgfld Mfg: Redding...

See Prices
  Profile Crimp Die, 40-65 Winchester

Redding Profile Crimp Die, 40-65 Winchester Mfg: Redding...

See Prices
  Taper Crimp Die, 6.5 Grendel

Redding Taper Crimp Die, 6.5 Grendel Mfg: Redding...

See Prices
  Comp Neck Die, 6.5-308 Win

This neck sizing die with interchangeable bushings brings an advanced level of technology and precision to shooters in all disciplines. Similar in concept to t...

See Prices
 Small Base Body Dies

Small base dies are intended for use in firearms with custom chamberings that are cut tighter than SAAMI specifications. These body dies size the body and the s...

See Prices
  Neck Die Set, 218 Bee

Redding Neck Die Set, 218 Bee Mfg: Redding...

See Prices
  Carbide Grx Push Thru Base Sizing Die

This Push Thru die is designed to completely eliminate bulges near the case base, common in 40 S&W brass. By passing the case completely through the dies, the b...

See Prices
 Profile Crip Dies

These cartridge crimp dies were designed for those who want the best possible crimp. Profile crimp dies provide tighter, more uniform roll type crimp, and requi...

See Prices
 Profile Crimp Handgun Dies

These handgun cartridge crimp dies were designed for those who want the best possible crimp. Profile crimp dies provide tighter, more uniform roll type crimp, a...

See Prices
  Competition Long Vld Seater Stems

Redding Competition Long VLD Seater Stems. Stems are 1-3/16" long. Mfg: Redding...

See Prices
 Handgun Taper Crimp Dies

Designed for handgun cartridges which headspace on the case mouth where conventional roll crimping is undesirable. Also available for some revolver cartridges, ...

See Prices
 Carbide Sizer Handgun Dies

Titanium carbide differs considerably from other carbides, and is the ideal material for resizing cartridge cases. Titanium carbide has the highest hardness of ...

See Prices
 Handgun Form & Trim Dies

Redding Trim Dies allow you to file trim your cases without unnecessary resizing. Other manufacturers use sizing die dimensions, forceing you to full length res...

See Prices
 Case Forming Dies

Case forming dies are for those who wish to form brass cases from one caliber to another. Most case forming is done to produce ammunition that is not factory a...

See Prices
 Straight Wall Expander Dies

These Redding Straight Wall Expander Dies contain a neck expander plug for use before the bullet seating process. Expander Dies flare the case mouth slightly to...

See Prices
 Neck Sizing Die Sets

Redding Neck Die Sets contain two dies. The Neck Sizing Dies contains a decapping rod assembly with a neck expancer button. The Seating Die includes bullet guid...

See Prices
  Full Length Die, 416 Rem Mag

These dies size the full length of your cartridge Including the neck and body of the case. Includes a decapping assembly and expander ball. Available individua...

See Prices
 Full Length Sizing Dies

These dies size the full length of your cartridge Including the neck and body of the case. Includes a decapping assembly and expander ball. Available individua...

See Prices
  Seater Die, 6.5mm X 57 Mauser

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater Die, 6.5 Rem Mag

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater Die, 7.7 X 58 Jap

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater Die, 30 Rem

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater Die, 375 Wthby Mag

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater Die, 378 Wthby Mag

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater Die, 460 Wthby Mag

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater Die, 416 Wthby Mag

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater, 224 Wthby Mag

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater, 375/444 Marlin

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater, 219 Donaldson Wasp

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater, 25/284 Win

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater, 30-30 Imp 40

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater, 35 Whelen Imp 40

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater, 7mm/300 Wthby Mag

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater, 250 Sav Imp 40

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater, 7 X 57 Imp 40

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater, 7mm -08 Rem Imp 40

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Deluxe Die Set, 25 Wssm

The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Mfg: Redding...

See Prices
  Type S Neck Die, 7mm Ihmsa

The Bushing Neck Sizing Die by Redding provides reloaders with a 7/8'''''''' - 14 die that utilizes interchangeable bushings for precise case neck resizing. Thi...

See Prices
  Type S Neck Die, 338/06

The Bushing Neck Sizing Die by Redding provides reloaders with a 7/8'''''''' - 14 die that utilizes interchangeable bushings for precise case neck resizing. Thi...

See Prices
  Type S Neck Die, 7.62 X 39

The Bushing Neck Sizing Die by Redding provides reloaders with a 7/8'''''''' - 14 die that utilizes interchangeable bushings for precise case neck resizing. Thi...

See Prices
  Type S Neck Die, 6.5-308 Win

The Bushing Neck Sizing Die by Redding provides reloaders with a 7/8'''''''' - 14 die that utilizes interchangeable bushings for precise case neck resizing. Thi...

See Prices
 Type S Bushing Neck Die Sets

The Type S Bushing Style Neck Die set proveds reloaders with a simple means to precisely control case neck size and tension. Packaged in a Redding Die Box with ...

See Prices
  Type-S Neck Bushing Die Set, 22 Hornet

Redding Type-S Neck Bushing Die Set, 22 Hornet Mfg: Redding...

See Prices
  Deluxe Die Set, 6mm/22-250

The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Mfg: Redding...

See Prices
  Custom Type S Neck Die - 6mm Dasher

Bushing Neck Sizing Dies utilize interchangeable bushings for precise case neck resizing, allowing the reloader to control the amount of neck sizing on their ca...

See Prices
  Types S Match Full Length Die Set, 22 Ppc

Includes a Type S Bushing Full Length Sizing Die and a Competition Series Bullet Seater. Packaged in a Redding Die Box with a wrench and an extra decapping pin....

See Prices
 Type S Match Bushing Full Die Sets

The Redding Type S Match Bushing Full Die Set contains a Type S Bushing Full Sizing Die and a Compeition Seating Die. The Type S Bushing Full Die allows full le...

See Prices
  Type S Match Neck Die Set, 22 Hornet

This die set includes a Type S Bushing Neck Die, a Body die, and a Competition Bullet Seater. Packaged in a Redding Die Box with a wrench and an extra decapping...

See Prices
 Type S Match Bushing Neck Die Sets

Type S Match Bushing Neck Die Set contains a Type S Bushing Neck Sizing Die, Body Die, and Competition Seating Die. Mfg: Redding...

See Prices
  Type S Match Neck Die Set, 17 Rem

This die set includes a Type S Bushing Neck Die, a Body die, and a Competition Bullet Seater. Packaged in a Redding Die Box with a wrench and an extra decapping...

See Prices
  Type S Match Neck Die Set, 7mm Br Rem

This die set includes a Type S Bushing Neck Die, a Body die, and a Competition Bullet Seater. Packaged in a Redding Die Box with a wrench and an extra decapping...

See Prices
  Type S Match Neck Die Set, 223 Wssm

This die set includes a Type S Bushing Neck Die, a Body die, and a Competition Bullet Seater. Packaged in a Redding Die Box with a wrench and an extra decapping...

See Prices
  Type S Match Neck Die Set, 22 Ppc

This die set includes a Type S Bushing Neck Die, a Body die, and a Competition Bullet Seater. Packaged in a Redding Die Box with a wrench and an extra decapping...

See Prices
  Type S Match Neck Die Set, 6.5mm/06

This die set includes a Type S Bushing Neck Die, a Body die, and a Competition Bullet Seater. Packaged in a Redding Die Box with a wrench and an extra decapping...

See Prices
  Type S Match Neck Die Set, 6mm Rem Imp 40

This die set includes a Type S Bushing Neck Die, a Body die, and a Competition Bullet Seater. Packaged in a Redding Die Box with a wrench and an extra decapping...

See Prices
  Type S Match Neck Die Set, 17 Mach Iv

Redding Type S Match Neck Die Set, 17 Mach IV Mfg: Redding...

See Prices
  Type S Match Neck Die Set, 7mm Stw

This die set includes a Type S Bushing Neck Die, a Body die, and a Competition Bullet Seater. Packaged in a Redding Die Box with a wrench and an extra decapping...

See Prices
  Deluxe Die Set, 17 Ackley Hornet

The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Mfg: Redding...

See Prices
  Deluxe Die Set, 22/6mm Rem

The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Mfg: Redding...

See Prices
  Deluxe Die Set, 30 Br

The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Mfg: Redding...

See Prices
  Deluxe Die Set, 6.5mm Br

The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Mfg: Redding...

See Prices
  Deluxe Die Set, 22-243 Win

The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Mfg: Redding...

See Prices
  Deluxe Die Set, 6x22-250 Imp 40

The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Mfg: Redding...

See Prices
  Deluxe Die Set, 25/300 Wsm

The Redding Deluxe Die Sets include the full length sizing die, standard seating die and th eneck sizing die. Mfg: Redding...

See Prices
  Seater, 6mm Xc

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater, 9.3mm X 74r

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Deluxe Die Set, 300 Rcm

Redding Deluxe Die Set, 300 RCM Mfg: Redding...

See Prices
 Deluxe 3-Die Sets

The Redding Deluxe Die Sets include the full length sizing die, standard seating die and the neck sizing die. All dies are made using the finest alloy steels ob...

See Prices
  Type S-Neck Bushing Dies, Category Iii Cartridges

Bushing Neck Sizing Die utilizes interchangeable bushings for precise case neck resizing, allowing the reloader to control the amount of neck sizing on his case...

See Prices
 Trim Dies

Redding Trim Dies allow you to file trim your cases without unnecessary resizing. Other manufacturers use sizing die dimensions, forceing you to full length res...

See Prices
  Type S Match Neck Die Set, 6mm/284 Win

This die set includes a Type S Bushing Neck Die, a Body die, and a Competition Bullet Seater. Packaged in a Redding Die Box with a wrench and an extra decapping...

See Prices
  Seater, 25-06 Rem Imp 40

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Type S Match Neck Die Set, 243 Win Imp 40

This die set includes a Type S Bushing Neck Die, a Body die, and a Competition Bullet Seater. Packaged in a Redding Die Box with a wrench and an extra decapping...

See Prices
 Competition Bushing Neck Die Sets

Redding Competition Bushing Neck Die Set includes a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater. Neck Sizing Die and Seater...

See Prices
 Form & Trim Die Series C 30-55 Win.

FORM & TRIM DIE SERIES C 30-55 WIN. Mfg: Redding...

See Prices
 Competition Seater Dies

We feel the Redding Competition Bullet Seater is the best bullet 7/8-14 bullet seater on the market today. The machining is precise, and the sliding chamber is ...

See Prices
 Adjustable Profile Crimp Dies

Redding Micrometer Adjustable Profile Crimping Dies are top adjusting to simplify making precise adjustments because any variation in case length and wall thick...

See Prices
 Dual Ring Carbide Sizing Die Sets

Dual Ring Carbide Sizing Dies are the correct answer to the compromise that has plagued traditional carbide dies of all manufacturers since their creation. The ...

See Prices
 Premium Deluxe Die Sets

Following the introduction of Bullet Seating Micrometers for our standard series of seating dies, our customers have been asking for complete die sets with this...

See Prices
  Grx Push Thru Base Sizing Die

This Push Thru die is designed to completely eliminate bulges near the case base, common in 40 S&W brass. By passing the case completely through the dies, the b...

See Prices
  Form And Trim Die, 45 Acp/45 Auto Rim

Redding case forming dies are designed to shape the parent cartridge (original case) into the desired case by changing the brass in small increments. This metho...

See Prices
  Plastic Die Box

Redding Plastic Die Box Mfg: Redding...

See Prices
 Competition Neck Decapping Rods

Replacement decapping rod assembly for the Redding Competition Bushing Neck Sizing Dies. Mfg: Redding...

See Prices
  Decap Assembly For Rd69100

One piece decapping rod and pin assembly for #749-002-640 Redding small decapping die. Decapping pin is .080 diameter. Mfg: Redding...

See Prices
  Die Spacer Kit

Redding Die Spacer Kit Mfg: Redding...

See Prices
 Carbide Kit For Competition Bushing Die

CARBIDE KIT FOR COMPETITION BUSHING DIE Mfg: Redding...

See Prices
  Competition Seater Plugs

Redding Competition Seater Plugs Mfg: Redding...

See Prices
  Decap Rod Assemblies

Includes decapping pin and expander ball Replacement decap rod assembly for Redding sizing dies. Mfg: Redding...

See Prices
  Full Length Die Set, 416 Ruger

The Redding FL Die Sets include the full length (FL) sizing die and the standard seating die. When ordering please give us the Full Length Die Set number. Mfg: ...

See Prices
  Seater Die, 6mm/22-250

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Seater Die

The Redding Standard Seating Die includes a build-in crimping ring and the proper seating plug. These seaters can be used with or without the crimping engaged....

See Prices
  Fl Die

These dies size the ''''''''full lenght'''''''' of your cartridge from the neck down to the base of the case. Includes a decapping assembly and expander ball. ...

See Prices
  Type S Match Neck Die Set, 223 Rem Imp 40

This die set includes a Type S Bushing Neck Die, a Body die, and a Competition Bullet Seater. Packaged in a Redding Die Box with a wrench and an extra decapping...

See Prices
  Type S Decapping Assemblies

REDDING TYPE S DECAPPING ASSEMBLIES Mfg: Redding...

See Prices
  Decap Assembly

Redding Decap Assembly Mfg: Redding...

See Prices
 Full Length Handgun Die Sets

Redding Full Length Die Sets contain two dies. The Full Length resizing die contains a decapping rod assembly. The Seating Die includes bullet guide, built-in c...

See Prices
 Body Dies

Body Dies are designed to full length resize the case body, bump the shoulder position for proper chambering, but not size the neck at all. They are made withou...

See Prices
 Sinclair Cross Bolt Lock Ring

These new Sinclair Die Lock Rings are machined from stainless steel and fit all standard 7/8 thru 14 reloading dies or press mounted accessories. The lock ring ...

See Prices
 Sinclair Redding Die Lock Ring Pliers

These machined aluminum split pliers are designed to loosen Redding dies when screwed into the press. These pliers fit the die body lock ring, which frequently...

See Prices
 Sinclair Lock Rings (3pk)

These Sinclair Die Lock Rings are machined from stainless steel and fit all standard 7/8 thru 14 reloading dies or press mounted accessories. The lock ring surf...

See Prices
 Sinclair Carbide Sizing Bushings

Sinclair Carbide Sizing Bushings Mfg: Sinclair International...

See Prices
 Skip

This set of seven die shims for 7/8 by fourteen dies permits you to adjust your sizing die by a desired amount without loosening the die lock ring. The origina...

See Prices
 Skip

Set of 10 shims for L.E. Wilson seater dies. The set includes .003 inch to .020 inch shims that are notch marked for easy size identification. Set up your seate...

See Prices
 Sinclair/L.E. Wilson Micrometer Seater Top

The Sinclair Micrometer Top allows the handloader to convert existing L.E. Wilson seaters to micrometer seaters. The top is constructed of stainless steel and i...

See Prices
 Sinclair Stuck Case Removal Tool

We developed this handy tool to help solve the reloader's age-old nightmare; removing a case stuck in the sizing die. This happens when the rim of the case tear...

See Prices
  Micro-Adjust Bullet Seaters

We gathered our customers ideas and reloading experience with hand dies, and partnered with the experts who make them, to introduce the new Sinclair/L.E. Wilson...

See Prices
 Bushing Full Length Sizer Dies

Whiddens' hand-polished Bushing Sizer dies have a shorter overall length for better shoulder bump back, a smaller base and tighter internal tolerances. All of t...

See Prices
 Full Length Sizer And Seater Dies Sets

Whiddens' hand-polished bushing sizer dies have a shorter overall length for better shoulder bump back, a smaller base and tighter internal tolerances. All of t...

See Prices
 Bushing Full Length Sizer And Seater Die Sets

Whiddens' hand polished Bushing Full Length Sizer and Seater Sets come in most standard calibers . The Full Length Sizer Die has a shorter overall length for be...

See Prices
 Micrometer Seater Dies

For precise, consistent OAL handloads, the internals of the Whidden Seater Die are designed to keep your rounds .... Round. Inside the die is a floating sleeve ...

See Prices
 Full Length Sizer Dies

Whiddens' hand-polished sizer dies have a shorter overall length for better shoulder bump back, a smaller base and tighter internal tolerances. All of their siz...

See Prices

Like Us on FaceBook: